Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T17:55:13.934Z Has data issue: false hasContentIssue false

Oxidation Behavior of Gamma-Titanium Aluminide Alloys

Published online by Cambridge University Press:  26 February 2011

Douglas W. Mckee
Affiliation:
General Electric Company, Research and Development Center, P.O. Box 8, Schenectady, NY 12301
Shyhchin C. Huang
Affiliation:
General Electric Company, Research and Development Center, P.O. Box 8, Schenectady, NY 12301
Get access

Abstract

The oxidation behavior of a number of gamma-TiAl alloys with ternary additions has been studied for extended periods during rapid thermal cycling to temperatures of up to 1000°C in flowing air. Under these conditions, binary alloys, such as Ti-48a/oAl and Ti-52a/oAl form flaking scales with sub-scale embrittlement, although the initial oxidation rate decreases with increasing aluminum content. Ternary Ti-Al-Cr and Ti-Al-Ta alloys with up to 4 a/o Cr or Ta also show a tendency to form spalling scales at these temperatures. On the other hand, the addition of niobium or tungsten results in a dramatic improvement in oxidation resistance at 850 °C, although at 1000°C even these alloys begin to spall after an induction period of several hundred hours.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable