Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T01:58:13.987Z Has data issue: false hasContentIssue false

Oxidation of Silicon Implanted with High-Dose Aluminum

Published online by Cambridge University Press:  21 February 2011

Zunde Yang
Affiliation:
Department of Materials Science and Engineering, Stevens Institute of Technology, Hoboken, NJ 07030
Honghua Du
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, TN 37831
Stephen P. Withrow
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

Si (100) wafers were implanted with Al at 500°C to high doses at multi-energies and were oxidized in 1 atm flowing oxygen at 1000°–1200°C. The morphology, structure, and oxidation behavior of the implanted and oxidized Si were studied using optical microscopy, atomic force microscopy, and cross-sectional transmission electron microscopy in conjunction with selected area electron diffraction and energy dispersive x-ray analysis. Large Al precipitates were formed and embedded near the surface region of the implanted Si. The oxidation rate of the Al-implanted Si wafers was lower than that of virgin Si. The unique morphology of the implanted Si results from rapid Al diffusion and segregation promoted by hot implantation. The reduction of the oxidation rate of Si by Al implantation is attributed to the preferential oxidation of Al and formation of a continuous difiusion barrier of Al2O3.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable