Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-14T21:15:27.238Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxygen Sinks in SiC-Based Ceramics

Published online by Cambridge University Press:  22 February 2011

Wolfgang Braue,
K. Das Chowdhury and
Ray W. Carpenter
Wolfgang Braue
Affiliation:
German Aerospace Research Establishment (DLR), Materials Research Institute, D-51147 Cologne, Germany
K. Das Chowdhury
Affiliation:
Massachusetts Institute of Technology, Mat. Sci. & Eng. Dept., Cambridge, MA 02139
Ray W. Carpenter
Affiliation:
Arizona State University, Center For Solid State Science, Tempe, AZ 85287-1704
Get access

Abstract

During an HREM/AEM investigation, two different oxygen sinks were identified for a variety of SiC-ceramics involving different sintering mechanisms: segregation of oxygen to i) internal interfaces, and ii) “excess-carbon” secondary phases consisting of basically turbostratic graphite and an intermediate amorphous Si-C-O phase. Si-C-O glasses and polycarbosilanebased nonstoichiometric SiC materials (Nicalon fibers) are well suited as model systems to evaluate the structure and the stability range of the amorphous Si-C-O phase in SiC-based ceramics.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 327: Symposium N – Covalent Ceramics II: Non-Oxides , 1993, 275
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Braue, W., Goering, J. and Ziegler, G., in Ceramic Materials and Components for Engines, edited by Tennery, V. J., The American Ceramic Society, 818 (1988)Google Scholar
[2] Sigl, L. S. and Kleebe, H. J., J. Am. Ceram. Soc. 76, 773 (1993)Google Scholar
[3] Yavuz, B. O. and Hench, L. L., Ceram. Eng. Sci. Proc. 3, 596, 1982 Google Scholar
[4] Renlund, G. M., Prochazka, S. and Doremus, R. H., J. Mater. Res. 6, 2716 (1993)Google Scholar
[5] Coustumer, P. Le, Monthieux, M. and Oberlin, A., J. Europ. Ceram. Soc. 11, 95 (1993)Google Scholar
[6] Delverdier, O., Monthioux, M., Mocaer, D. and Pailler, R., J. Europ. Ceram. Soc. 12, 27 (1993)Google Scholar
[7] Weiss, J. K., Carpenter, R. W., Braue, W. and Higgs, A., in Proc. 47th Annual Meeting of the Electron Microscopy Society of America, edited by Bailey, G., San Francisco Press, 226, 1989 Google Scholar
[8] Braue, W. and Carpenter, R. W., J. Mater. Sci. 25, 2943 (1990)Google Scholar
[9] Skiff, W. M. and Carpenter, R. W., in Proc. 40th Annual Meeting of the Electron Microscopy Society of America, edited by Bailey, G., San Francisco Press, 564 (1982)Google Scholar
[10] Chowdhury, K. Das, Carpenter, R. W. and Braue, W., in Atomic Scale Imaging of Surfaces and Interface, edited by Biegelsen, D. K., Smith, D. J. and Tong, S. Y., (Mater. Res. Soc. 295, Pittsburgh, PA, 1993), pp. 183 Google Scholar
[11] Bow, J. S., Kim, M. J. and Carpenter, R. W., in Proc. 49th Annual Meeting of the Electron Microscopy Society of America, edited by Bailey, G., San Francisco Press, 938 (1991)Google Scholar
[12] Krivsky, W. A and Schuhmann, R., Trans. Met. AIME 21, 898 (1961)Google Scholar
[13] Weiss, J., Lukas, H. L., Lorenz, J., Petzow, G. and Krieg, H., CALPHAD 5, 125 (1981)Google Scholar