Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T12:49:44.524Z Has data issue: false hasContentIssue false

Pad Conditioning and Pad Surface Characterization in Oxide Chemical Mechanical Polishing

Published online by Cambridge University Press:  01 February 2011

A. Scott Lawing*
Affiliation:
Rodel, Inc., 3804 East Watkins Street, Phoenix, AZ 85034
Get access

Abstract

An understanding of the pad surface state and its effect on the polishing process is critical to a more fundamental understanding of Chemical Mechanical Polishing (CMP). Vertical Scanning Interferometry has been shown to be a useful tool to monitor the pad surface state. In this paper, various techniques for analyzing pad surface data obtained using interferometry are described. The pad surface state can be modified through the manipulation of process and pad conditioner design parameters. Many of the parameters extracted from interferometry data show strong correlations with corresponding polish data. A careful analysis of these complementary data can yield significant insight into the mechanisms of CMP processes.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable