Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T07:38:42.601Z Has data issue: false hasContentIssue false

Palladium Based Micro-Membrane Hydrogen Gas Separator-Reactor in a Miniature Fuel Processor for Micro Fuel Cells

Published online by Cambridge University Press:  15 March 2011

Sooraj V. Karnik
Affiliation:
Department of Electrical and Computer Engineering, Department of Chemical Engineering, Lehigh University, Bethlehem, PA 18015, USA
Miltiadis K. Hatalis
Affiliation:
Department of Electrical and Computer Engineering, Department of Chemical Engineering, Lehigh University, Bethlehem, PA 18015, USA
Mayuresh V. Kothare
Affiliation:
Department of Chemical Engineering, Lehigh University, Bethlehem, PA 18015, USA
Get access

Abstract

A novel palladium-based micromembrane has been fabricated and tested which has the potential to be used for carbon monoxide shift reaction and hydrogen gas separation in a miniature fuel processor for micro fuel cells. The micromembrane structure is built in silicon substrate, using standard MEMS microfabrication processes. The four layers, viz., copper, aluminum, spin-on-glass (SOG) and palladium form the composite micromembrane. Copper, aluminum and SOG serve as a structural support for the palladium film. Copper also acts as a catalyst in the shift reaction that converts unwanted carbon monoxide gas into hydrogen, which in turn is separated by the palladium micro-membrane. For a particular combination of thicknesses for various layers, the composite micro-membrane withstands a pressure gradient up to 1 atm. The micromembrane separates hydrogen from a 20% hydrogen balance nitrogen gas mixture at room temperature.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable