Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T05:14:56.379Z Has data issue: false hasContentIssue false

Passivated Interconnect Lines: Thermomechanical Analysis and Curvature Measurements

Published online by Cambridge University Press:  10 February 2011

A. Wikström
Affiliation:
Department of Solid Mechanics, Royal Institute of Technology (KTH), SE-100 44 Stockholm, Sweden
P. Gudmundson
Affiliation:
Department of Solid Mechanics, Royal Institute of Technology (KTH), SE-100 44 Stockholm, Sweden
S. Suresh
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, U.S.A
Get access

Abstract

It is well known that curvature measurements may be used to obtain volume averaged stresses in thin continuous films and unpassivated lines without knowledge of the material properties of the film or lines. However, recently a method was presented which makes it possible to use curvature measurements also for the determination of volume averaged stresses in passivated lines. Since the problem is statically indeterminate the method requires knowledge of the material properties of the lines and passivation. The sensitivity of the method to uncertainties in material properties and curvature data is here investigated by utilizing the finite element method for anisotropic Cu or Al lines embedded in SiO2 passivation. Furthermore, the method is extended to cover the case of different stress-free temperatures for the lines and passivation respectively.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable