Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T21:15:50.802Z Has data issue: false hasContentIssue false

Performance Characteristics of Gel Polymer Electrolyte Separators in Rechargeable Lithium Ion Cells

Published online by Cambridge University Press:  10 February 2011

Weiwei Huang
Affiliation:
Eveready Battery Company, Inc., 25225 Detroit Road, Westlake, OH 44145
James R. Akridge
Affiliation:
Eveready Battery Company, Inc., 25225 Detroit Road, Westlake, OH 44145
Get access

Abstract

The swelling behavior of poly(vinylidene fluoride-hexafluoropropylene), noted as P(VdF- HFP), was under various conditions. Increasing the HFP unit content in P(VdF-HFP) and temperature increased the swelling degree of the polymers considerably. The amount of the electrolyte solution absorbed by P(VdF-HFP) at room temperature showed the following trend: DMC>EC/DMC>DEC≈EC/DEC. The presence of LiPF6 in carbonate solvents did not affect on the swelling degree of PVdF and P(VdF-8%IIFP) in all solutions studied but lowered the swelling degree of P(VdF-15%HFP) in DMC, EC/DEC and EC/DMC/DEC solution at room temperature or prevented it from dissolution in the them at 55°C. A variable search experiment indicated that changing the pre-conditioning temperature from 21 to 55°C is more effective than other changes considered in the experiment for increasing high rate discharge capability. Some coins cells using the composite GPE separators had higher discharge capability than those using microporous polyethylene separators.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable