Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T20:52:42.317Z Has data issue: false hasContentIssue false

Phase Field Approach to Transformations Involving Concurrent Nucleation and Growth

Published online by Cambridge University Press:  15 February 2011

J.P. Simmons
Affiliation:
Air Force Research Laboratory, Materials and Manufacturing Directorate, Processing Science Group, AFRL/MLLM, Wright-Patterson AFB, Dayton, OH 45433.
C. Shen
Affiliation:
Department of Materials Science and Engineering, The Ohio State University, 2041 College Rd, Columbus, OH 43210.
Y. Wang
Affiliation:
Department of Materials Science and Engineering, The Ohio State University, 2041 College Rd, Columbus, OH 43210.
Get access

Abstract

A model is developed that is capable of simulating simultaneous nucleation, growth, and coarsening. Growth and coarsening are simulated with a 2-D Phase Field model and nucleation is simulated by a stochastic algorithm. The actual nucleation events are simulated by placing ordered particles in the matrix, according to the local supersaturation, with the mean rate of introduction matching that of the nucleation rate. The nucleation rates are input parameters that could, for example, be supplied by experiment or atomistic modeling. Isothermal results for this model under conditions approaching constant nucleation show excellent agreement with the Johnson-Mehl- Avrami-Kolmogorov (JMAK) theory of isothermal transformations involving nucleation and growth. Because the Phase Field simulation is interrupted in order to put particles in, problems can arise due to the mismatch of the assumed diffusion field about the nucleating particles and that would be obtained as a result of growth. This can lead to numerical instabilities as the simulation parameters are adjusted to approach the site saturation extreme as well as underestimating the transformation rate by a small transient time. Preliminary step quench results showed the method to be stable enough to simulate non-isothermal transformations with a series of step quench operations.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable