Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T01:33:59.928Z Has data issue: false hasContentIssue false

Photochemical Pattern Etching of Single-Crystalline 3C-SiC

Published online by Cambridge University Press:  10 February 2011

T. Mori
Affiliation:
Faculty of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka, Kanagawa, 259–12, JAPAN
K. Hatao
Affiliation:
Faculty of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka, Kanagawa, 259–12, JAPAN
M. Murahara
Affiliation:
Faculty of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka, Kanagawa, 259–12, JAPAN
Get access

Abstract

A single-crystalline 3C-SiC is very difficult to etch compared with a polycrystalline SiC. Thus, a photochemical pattern etching of the SiC was demonstrated by using Xe2* excimer lamp and ArF or KrF excimer laser. To promote the surface reaction, a Xe2* excimer lamp was employed to produce many radicals on the sample surface; simultaneously, ArF or KrF laser light irradiated the surface via a circuit pattern to dissociate the Si-C bonds. The Si and C reacted with the F and N radicals photo-dissociated from NF3 gas to form SiF4, CFn and CN, which diffused in the reaction cell. As a result, the single-crystalline 3C-SiC was photo-chemically etched effectively. With the NF3 gas of 200Torr, the Xe2* excimer lamp of 7mW/cm2, and the KrF excimer laser of 650mJ/cm2, 20Hz and 10,000shots, the etch depth of 700 Å was successfully achieved.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable