Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T11:37:55.404Z Has data issue: false hasContentIssue false

Photoelastic Waveguides Using Strain-Compensated InAsP/InGaP Multi-Quantum-Wells

Published online by Cambridge University Press:  15 February 2011

Q. Z. Liu
Affiliation:
Department of Electrical and Computer Engineering, University of California, San Diego La Jolla, CA 92093
X. B. Mei
Affiliation:
Department of Electrical and Computer Engineering, University of California, San Diego La Jolla, CA 92093
L. S. Yu
Affiliation:
Department of Electrical and Computer Engineering, University of California, San Diego La Jolla, CA 92093
C. W. Tu
Affiliation:
Department of Electrical and Computer Engineering, University of California, San Diego La Jolla, CA 92093
S. S. Lau
Affiliation:
Department of Electrical and Computer Engineering, University of California, San Diego La Jolla, CA 92093
Get access

Abstract

Photoelastic optical waveguides using strain-compensated InAsP/InGaP multiplequantum-well (MQW) have been fabricated. Lateral light confinement for waveguiding is achieved by introducing stress into semiconductor heterostructures with stable WNi surface stressor stripes. The waveguides have been characterized at both 1.52 μm and 1.32 μm wavelength in term of TE/TM intensity ratio. At 1.52 μm, the waveguides favor the propagation of TE mode, and the TE/TM intensity ratio can be as large as 15 dB. At 1.32 μm, the TE and TM intensity can be comparable. Anisotropy of waveguides fabricated along [110] or [110] directions has also been observed in term of TE/TM intensity ratio, which suggests the presence of anisotropic property of the strain-compensated MQW.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable