Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T08:31:30.127Z Has data issue: false hasContentIssue false

Photo-Induced Corrosion in Microelectronic Devices Containing Dissimilar Metals.

Published online by Cambridge University Press:  15 February 2011

C. Belisle
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
L. Westergard
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
D. Florence
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
T. Haskett
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
G. Scott
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
B. Greenwood
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
J. Prasad
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
M. Engle
Affiliation:
AMI Semiconductor Inc., 2300 Buckskin Road Pocatello, ID 83201 Phone: (208)-233-4690 Fax: (208)-234-6740 Email: cbelisle@amis.com
Get access

Abstract

Various metals with different galvanic potentials are used to fabricate the microelectronic circuits. One of the most commonly used processes during integrated circuit manufacturing is the tungsten via fill. To obtain maximum interconnect density with low via resistance requires that metal-via overlap is essentially zero. Zero overlap with litho variations and thus misalignment may result in unlanded vias. Since the vias are used to connect various metal levels, a large number of these cases may occur causing device failures and thus yield loss. To study this problem a variety of test structures were studied and a new mechanism of corrosion was found. The tungsten corrosion observed in these structures was found to be photo-induced. In this paper we will discuss the mechanism of photoinduced galvanic corrosion that occurs between the aluminum and tungsten metal layers during microelectronic manufacturing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable