Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T00:38:17.941Z Has data issue: false hasContentIssue false

Physics and Electrochemistry of Oxide Growth

Published online by Cambridge University Press:  10 February 2011

Elzbieta Sikora
Affiliation:
Center for Advanced Materials, 517 Deike Building, Penn State University, University Park, PA 16802, esikora@cam.psu.edu, ddm@oas.psu.edu.
Digby D. Macdonald
Affiliation:
Center for Advanced Materials, 517 Deike Building, Penn State University, University Park, PA 16802, esikora@cam.psu.edu, ddm@oas.psu.edu.
Get access

Abstract

The growth of the passive film on tungsten in phosphate buffer solution has been described in terms of the Point Defect Model (PDM). The steady-state current and passive film thickness have been measured as a function of voltage, with the film thickness being obtained from an analysis of capacitance and reflectance data. The observed data cannot be accounted for by the High Field Model (HFM) in its classical form, but can be understood in terms of the PDM. Diagnostic criteria that have been derived from the PDM were used to identify the majority charge carriers in the passive film. The Point Defect Model was employed, together with Mott- Schottky analysis to explore the crystallographic defect structures of the passive films, whereas their electronic structures have been studied using photoelectrochemical impedance spectroscopy (PEIS). The experimental results demonstrate that these structures are strongly coupled with the vacancies acting as the dopants.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable