Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T17:48:57.467Z Has data issue: false hasContentIssue false

Piezoelectric Characterization of Bulk and Thin Film Ferroelectric Materials using Fiber Optics

Published online by Cambridge University Press:  10 February 2011

J.T. Dawley
Affiliation:
Department of Materials Science and Engineering University of Arizona, Tucson, AZ 85721.
G. Teowee
Affiliation:
Donnelly Corporation 4545 E. Fort Lowell Rd., Tucson, AZ 85712
B.J.J. Zelinski
Affiliation:
Department of Materials Science and Engineering University of Arizona, Tucson, AZ 85721.
D.R. Uhlmann
Affiliation:
Department of Materials Science and Engineering University of Arizona, Tucson, AZ 85721.
Get access

Abstract

In this study, the use of a fiber optic technique for the measurement of the piezoelectric properties of ferroelectric bulk and thin film samples was investigated. The strain and piezoelectric properties (namely the d33 coefficients) were measured using the MTI-2000 Fotonic Sensor, which uses the principle of the optical lever to resolve very small changes in sample displacement (1 Å). Using this technique, we were able to detect the very small strains associated with the converse piezoelectric effect for PVDF films and bulk PZT samples, and correlate the results with data acquired from direct piezoelectric effect measurement. Comparison of the data sets prove that the optical lever would be a useful optical technique for measuring of the d33 values of ceramic thin films, such as BaTiO3, ZnO, and PZT.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable