Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T03:19:58.173Z Has data issue: false hasContentIssue false

Piezoresistive Sensors on Plastic Substrates Using Doped Microcrystalline Silicon

Published online by Cambridge University Press:  17 March 2011

P. Alpuim
Affiliation:
Instituto de Engenharia de Sistemas e Computadores (INESC), Rua Alves Redol, 9, 1000-029 Lisbon, PortugalDepartment of Materials Engineering, Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisbon, Portugal
V. Chu
Affiliation:
Instituto de Engenharia de Sistemas e Computadores (INESC), Rua Alves Redol, 9, 1000-029 Lisbon, Portugal
J. P. Conde
Affiliation:
Department of Materials Engineering, Instituto Superior Técnico, Av. Rovisco Pais, 1049-001 Lisbon, Portugal
Get access

Abstract

The piezoresistive behavior of optimized n-type and p-type microcrystalline silicon films deposited on polyethylene terephthalate plastic substrate by hot-wire and radio-frequency plasma-enhanced chemical vapor deposition, at a substrate temperature of 100 °C, is studied. A 4-point bending jig allowed the application of positive and negative strains in the films. Repeated measurements of the relative changes in the resistance of the samples during the strained condition showed reversible behavior, with p-type microcrystalline films having positive gauge factor in the range from 25 to 30 and n-type [.proportional]c-Si:H films having negative values of gauge factor from -40 to -10. The induced strain in the films was in the range between 0 and ±0.3%. A sensor utilizing the piezoresistive property of doped [.proportional]c-Si:H was used to map a contour with the shape of an Archimedes' spiral.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable