Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T22:13:38.699Z Has data issue: false hasContentIssue false

Plasma and Ion Beam Tools for Enhanced Battery Electrode Performance

Published online by Cambridge University Press:  03 September 2012

A. Anders
Affiliation:
Plasma Applications Group, Accelerator & Fusion Res. Div. Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720
F. Kong
Affiliation:
Energy & Environment Div. Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720
Y. Chen
Affiliation:
Department of Material Sciences, University of California, Berkeley, California 94720
O. R. Monteiro
Affiliation:
Plasma Applications Group, Accelerator & Fusion Res. Div. Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720
F. R. McLarnon
Affiliation:
Energy & Environment Div. Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720
I. G. Brown
Affiliation:
Plasma Applications Group, Accelerator & Fusion Res. Div. Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720
Get access

Abstract

Plasma and ion beam methods such as gas and metal ion implantation, plasma immersion ion implantation (PIII), and metal plasma immersion ion implantation and deposition (MePIIID) are introduced as powerful tools to modify the properties of battery electrodes. Three kinds of rechargeable electrochemical cells have been investigated: the lead-acid cell, the nickel alkaline-electrolyte cell, and the lithium cell. It was experimentally shown that (i) metal ion implantation of Ti, V, Cr, Ni, and W into lead and lead-antimony electrodes reduced the corrosion current by more than one order of magnitude, (ii) cobalt ion implantation into nickel electrodes enhanced the interconversion of Ni(OH)2 to NiOOH and the associated cycle life, (iii) nitrogen-PIII resulted in the formation of a nitrided lithium layer on lithium which stabilized the surface against corrosion, (iv) MePIIID with a tungsten plasma reduced the pitting corrosion of aluminum, a current collector for a lithium battery.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable