Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-15T20:27:27.954Z Has data issue: false hasContentIssue false

Plasma Processing Reactor with Surface Magnetic Field Confinement

Published online by Cambridge University Press:  21 February 2011

T. D. Mantei
Affiliation:
Department of Electrical and Computer Engineering, University of Cincinnati, Cincinnati, Ohio 45221-0030
T. E. Wicker
Affiliation:
Tegal Corporation, 11 Digital Drive, Novato, California 94947
D. Kazmierzak
Affiliation:
Department of Electrical and Computer Engineering, University of Cincinnati, Cincinnati, Ohio 45221-0030
Get access

Abstract

A plasma reactor has been developed for dry reactive plasma etching and thin semiconductor film deposition. The system combines a multipolar magnetic field layer [1] for charged-particle confinement, and independently controlled substrate biasing. A large volume of dense (1011 cm-3), uniform, quiescent plasma is produced at low working pressure ( 1 mTorr). Anisotropic profiles can be etched into silicon in an SF6-O2 plasma with vertical etch rates ∼l um/min. In a pure silane plasma, good quality polycrystalline silicon films can be deposited at rates 1 to 10 Å/sec., at substrate temperatures 50° to 300° C.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable