Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T17:14:34.348Z Has data issue: false hasContentIssue false

Plasma Spraying of Zirconia Coatings

Published online by Cambridge University Press:  21 February 2011

G. C. Wilson
Affiliation:
Idaho National Engineering Laboratory, EG&G Idaho, Inc., P.O. Box 1625, Idaho Falls, ID 83415-2210
J. A. Walter
Affiliation:
Miller Thermal Inc., 555 Communications Drive, P.O. Box 1081, Appleton, WI 54912
Get access

Abstract

As part of an investigation of the dynamics that occur in the plume of a thermal spray torch, an experimental and analytical study of the deposition of yttria-stabilized zirconia has been accomplished. Experiments were conducted using a Taguchi fractional factorial design. Nominal spray parameters were: 900 A, 36 kW, 100 scfh argon primary gas flow, 47 scfh helium secondary gas flow, 11.5 scfh argon powder carrier gas flow, 3.5 lb/h powder feed rate, 3 in. spray distance, and an automated traverse rate of 20 in./s. The coatings were characterized for thickness, hardness, and microstructural features with optical microscopy, scanning electron microscopy, and x-ray diffraction. Attempts are made to correlate the features of the coatings with the changes in operating parameters. Numerical models of the physical processes in the torch column and plume were used to determine the temperature and flow fields. Computer simulations of particle injection (10 to 75 μm zirconia particles) are presented.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable