Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-15T02:19:29.243Z Has data issue: false hasContentIssue false
  • English
  • Français

Polycrystalline Silicon as a Mechanical Material

Published online by Cambridge University Press:  21 February 2011

Richard S. Muller
Richard S. Muller*
Affiliation:
Berkeley Sensor & Actuator Center, Electrical Engineering Dept., University of California, Berkeley, CA 94720
Get access

Abstract

In 1982, Kurt Petersen published “Silicon as a Mechanical Material” in the Proceedings of the IEEE. This thorough review article heightened focus on the advantages of utilizing the mechanical as well as electrical properties of single-crystal silicon. Processes for shaping single-crystal silicon based upon selective etching were shown in the article to make silicon useful for a variety of miniature mechanical devices.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 182: Symposium C – Polysilicon Thin Films and Interfaces , 1990, 245
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Petersen, K. E., ‘Silicon as a mechanical material,” Proc. of the IEEE, 70, 420–457 (1982).Google Scholar
2. Howe, R. T., Muller, R. S., “Resonant-microbridge vapor sensor,” IEEE Trans. on Electr. Devices, ED–33, 499–506 (1986).10.1109/T-ED.1986.22519Google Scholar
3. Fan, L.-S., Tal, Y.-C., Muller, R. S., “Pin joints, gears, springs, cranks, and other novel micromechanical structures,” TRANSDUCERS '87, 4th Int. Conference Solid-State Sensors and Actuators, 849–852, Tokyo, Japan (June 2-5, 1987).Google Scholar
4. Fan, L.-S. Tai, Y.-C., Muller, R. S., “IC-processed electrostatic micromotors,” 1988 IEEE Electron Devices Meeting, 666–669, San Francisco, CA (Dec. 11-14, 1988).Google Scholar
5. Guckel, H., Sniegowski, J. J., Christenson, T. R., “Advances in processing techniques for silicon micromechanical devices with smooth surfaces,” 1989 IEEE Micro Electro Mechanical Systems Conference, 71–75, Salt Lake City, UT (Feb. 20-22, 1989).Google Scholar
6. Fan, L.-S., Muller, R. S., “As-deposited low-strain LPCVD polysilicon,” 1988 IEEE Solid-State Sensor and Actuator Workshop, 55–58, Hilton Head, SC (June 6-9, 1988).Google Scholar
7. Gabriel, K. J., Behi, F., Mehregany, M. et al. , “In-situ measurement of friction and wear in integrated polysilicon micromechanisms,” TRANSDUCERS '89, 5th Int. Conference Solid-State Sensors and Actuators, Montreux, Switzerland (June 25-30, 1989), Sensors and Actuators, A21, 1 to 3, 184-188 (1990).Google Scholar
8. Tang, W. C., Nguyen, T.-C. H., Howe, R. T., “Laterally driven polysilicon resonant microstructures,” 1989 IEEE Micro Electro Mechanical Systems Conference, 53–59, Salt Lake City, UT (Feb. 20-22, 1989), Sensors and Actuators, 25-32, vol. 20, 1 and 2 (Nov. 15, 1989).Google Scholar