Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T03:46:15.724Z Has data issue: false hasContentIssue false

Polycrystalline Silicon-Germanium Electrode Contact Technology Improvement for MEMS Applications

Published online by Cambridge University Press:  31 January 2011

Gert Claes
Affiliation:
gert.claes@imec.be, IMEC, Leuven, Belgium
Simone Severi
Affiliation:
severis@imec.be, IMEC, Leuven, Belgium
Stefaan Decoutere
Affiliation:
decoutere@imec.be, IMEC, Leuven, Belgium
Jean-Pierre Celis
Affiliation:
Jean-pierre.celis@mtm.kuleuven.be, K.U.Leuven, MTM, Leuven, Belgium
Ann Witvrouw
Affiliation:
witvrouw@imec.be, IMEC, Leuven, Belgium
Get access

Abstract

Poly-SiGe has quite some potential as structural MEMS layer for CMOS-MEMS integration. However, the contact resistance between SiGe MEMS and top CMOS metal should be low to avoid parasitic effects that would reduce the system performance. In this paper, a new and simple approach is proposed to achieve a low contact resistance between a top CMOS interconnect and a boron doped poly-SiGe MEMS layer deposited at 450 °C. The use of a 20 nm soft sputter etch in combination with a Ti-TiN (5-10 nm) interlayer results in a contact resistivity of 6.2 ± 0.4 × 10-7 Ωcm2 that is lower than previously reported. The uniformity of the contact resistivity across the wafer is also better than the state-of-the-art value.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable