Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T17:12:01.128Z Has data issue: false hasContentIssue false

Porous Alumina by Hot Isostatic Pressing

Published online by Cambridge University Press:  15 February 2011

Anatolijs Kuzjukevics
Affiliation:
Institue of Inorganic Chemistry of the Latvian Academy of Science, Salaspils, Latva
K. Ishizaki
Affiliation:
Nagaoka Univesity of Technology, Department of Mechenical Engineeing, Nagaoka, 940–21 Japan
Get access

Abstract

Production of porous alumina ceramics by capsule-free hot isostatic pressing of bimodally distributed alumina powders with a large size difference (>10) and reaction sintering of alumina powder and boron oxide formed by oxidation of boron nitride during sintering were investigated. The influence of the composition of bimodally distributed alumina and alumina-boron nitride mixture of powders on open and closed porosity was studied.

HIP treatment at 1600°C provided sintering of only fine-grained powder. A small loss in open porosity (about 4%) is observed with increasing of the fine powder weight fraction up to 0.4.

Reaction sintering of a fine-grained alumina powder with boron oxide gives significant (about 30%) increase of open porosity.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable