Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T11:59:11.879Z Has data issue: false hasContentIssue false

Practical Application of a Geometrically Nonlinear Stress-Curvature Relation

Published online by Cambridge University Press:  22 February 2011

Christine B. Masters
Affiliation:
The Pennsylvania State University, Department of Engineering Science and Mechanics, University Park, PA 16802
N. J. Salamon
Affiliation:
The Pennsylvania State University, Department of Engineering Science and Mechanics, University Park, PA 16802
Get access

Abstract

A recently developed geometrically nonlinear stress-curvature relation based on a minimization of the total strain energy, which predicts a bifurcation in shape as the magnitude of intrinsic film stress increases, is discussed in this paper. It is compared with the linear theories of Stoney and Brenner & Senderoff for a thin molybdenum film on silicon substrates with various thicknesses. Although the ratio of film to substrate elastic modulus is only 2, Stoney's equation generates significant error for this film/substrate system and the Brenner & Senderoff relation should be used for calculating initial film stress when plate deflections are small. When deflections exceed approximately half the substrate thickness the Brenner & Senderoff equation produces over 10% error and consequently, the nonlinear stress-deflection relation should be used to relate plate curvatures to initial film stress.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable