Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T12:03:57.657Z Has data issue: false hasContentIssue false

Practical Optical Characterization Of Fretted Surfaces

Published online by Cambridge University Press:  10 February 2011

S. C. Gustafson
Affiliation:
University of Dayton, Dayton, OH.
J. R. Mehta
Affiliation:
University of Arizona, Tucson, AZ.
G. N. Frantziskonis
Affiliation:
Visiting Scientists at the Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson AFB, OH, when this work was performed.
Get access

Abstract

Nominally smooth surfaces subjected to repeated contact may develop characteristic fretted textures. An important example concerns fretted surfaces that may develop on disk dovetail joints that secure fan blades in turbine engines. These surfaces may form sites for crack nucleation and subsequent catastrophic disk and engine failure. Thus a practical and reliable method for the nondestructive evaluation of such fretted surfaces is critically needed. In this paper straightforward optical techniques are considered for identifying and quantifying fretted (and other surface damaged) regions. For example, digital images of candidate surfaces may be processed to separate fretted from unfretted regions and to evaluate the relative degree of fretting. Ideally, optical characterization should be rapid, convenient, inexpensive, reliable, and insensitive to details of lighting and image capture.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable