Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T21:32:09.096Z Has data issue: false hasContentIssue false

Preferential Crystallization of β-FeSi2 from Micro-droplets Generated by Laser Ablation.

Published online by Cambridge University Press:  01 February 2011

Aiko Narazaki
Affiliation:
Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST) Central 5, 1–1–1 Higashi, Tsukuba, Ibaraki 305–8565, Japan
Tadatake Sato
Affiliation:
Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST) Central 5, 1–1–1 Higashi, Tsukuba, Ibaraki 305–8565, Japan
Yoshizo Kawaguchi
Affiliation:
Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST) Central 5, 1–1–1 Higashi, Tsukuba, Ibaraki 305–8565, Japan
Hiroyuki Niino
Affiliation:
Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST) Central 5, 1–1–1 Higashi, Tsukuba, Ibaraki 305–8565, Japan
Get access

Abstract

β-FeSi2 was successfully fabricated at room temperature via the deposition of molten micro-droplets generated by the KrF excimer laser ablation. Only the molten droplets precipitated as the β-FeSi2 crystalline phase on a silicon substrate kept even at room temperature, whereas the rest of film was amorphous. The crystallization behavior of micro-droplets has been discussed in the light of non-equilibrium process due to rapid cooling on the substrate. After the deposition, pulsed laser annealing was also performed in order to improve the crystallinity of the β-FeSi2 microprecipitates-containing film.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable