Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T21:28:57.576Z Has data issue: false hasContentIssue false

Preparation of Cross-Sectional TEM Samples of Fe-Zn Couples

Published online by Cambridge University Press:  21 February 2011

L. A. Giannuzzi
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
P. R. Howell
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
H. W. Pickering
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
W. R. Bidter
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

A preparation technique for the production of cross-sectional transmission electron microscope (TEM) samples from the interdiffusion regions of Fe-Zn binary couples is described. To alleviate the problem of unequal ion milling rates between the Fe and Zn, a 0.75mm thick Fe sheet has been double plated with a thick electrodeposited Zn coating to achieve a total couple thickness of ˜3mm. After slicing the couple in cross-section, the Fe region of the sample is dimpled to perforation near the Fe-Zn interface. Final thinning for TEM analysis is obtained by ion milling using a liquid nitrogen cold stage and sector speed control. The ion milling procedure is stopped when the perforated hole in the Fe-side of the couple extends through the faster eroding Zn-side of the interface. This technique, in modified form, is expected to be suitable for commercial steels coated with Zn-based alloys.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable