Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T12:02:11.689Z Has data issue: false hasContentIssue false

Preparation of Mesoporous Oxides for Mems Structures

Published online by Cambridge University Press:  17 March 2011

Jong-Ah Paik
Affiliation:
Dept. of Materials Science and Engineering University of California at Los Angeles, CA, USA
Nobuaki Kitazawa
Affiliation:
Dept. of Materials Science and Engineering University of California at Los Angeles, CA, USA
Shih-Kang Fan
Affiliation:
Dept.of Mechanical and Aerospace Engineering University of California at Los Angeles, CA, USA
Chang-Jin Kim
Affiliation:
Dept.of Mechanical and Aerospace Engineering University of California at Los Angeles, CA, USA
Ming C. Wu
Affiliation:
Dept. of Electrical Engineering University of California at Los Angeles, CA, USA
Bruce Dunn
Affiliation:
Dept. of Materials Science and Engineering University of California at Los Angeles, CA, USA
Get access

Abstract

The high porosity and uniform pore size provided by mesoporous oxide films offer interesting opportunities for MEMS devices that require low density and low thermal conductivity. This paper describes recent efforts at adapting mesoporous films for MEMS fabrication. Mesoporous SiO2 and Al2O3 films were prepared using block copolymers as the structure-directing agents, leading to films which were 70% porous and < 5 nm surface roughness. A number of etchants were investigated and good etch selectivity was observed with both dry and wet systems. Micromachining methods were used to fabricate cantilevers, micro bridges and membranes.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable