Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T06:27:16.184Z Has data issue: false hasContentIssue false

Preparation of SrTiO3 Thin Films by Ecr and Thermal Mocvd

Published online by Cambridge University Press:  21 February 2011

P-Y. Lesaicherre
Affiliation:
ULSI Device Development Laboratories, NEC Corporation, Sagamihara, Kanagawa 229
H. Yamaguchi
Affiliation:
Fundamental Research Laboratories, NEC Corporation, Kawasaki, Kanagawa 216, Japan
T. Sakuma
Affiliation:
Fundamental Research Laboratories, NEC Corporation, Kawasaki, Kanagawa 216, Japan
Y. Miyasaka
Affiliation:
Fundamental Research Laboratories, NEC Corporation, Kawasaki, Kanagawa 216, Japan
M. Yoshida
Affiliation:
Fundamental Research Laboratories, NEC Corporation, Kawasaki, Kanagawa 216, Japan
A. Ishitani
Affiliation:
ULSI Device Development Laboratories, NEC Corporation, Sagamihara, Kanagawa 229
Get access

Abstract

SrTiO3 thin films were prepared by ECR and thermal MOCVD. In thermal-CVD mode, Sr content and Ti content were at a maximum at 0.56 Torr. Results showed that SrO deposition is a surface reaction limited process between 500 and 650°C, whereas TiO2 deposition is surface reaction limited between 500 and 600 °C, and diffusion limited above 600 °C. At a low pressure of 8 mTorr, ECR oxygen plasma was found to help decompose Ti(i-OC3H7)4. In ECR-CVD mode, the deposition temperature could be lowered to 400 °C. TEM and SEM analyses showed that SrTiO3 thin films have a columnar structure. The size of the grains depends on film thickness, and their shape on film composition (Sr/Ti ). Films prepared by thermal-CVD had a lateral step coverage of 50 %. 40 nm SrTiO3 thin films (Sr/Ti = 1.0) prepared by thermal-CVD on Pt/TaOx/Si and annealed for 2 hours in O2 had a maximum dielectric constant of 139 (Cs = 31 fF/μm2 and teq = 1.1 nm) and a leakage current density of 6x10−8 A/cm2 at 1.0 V.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable