Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T04:16:10.853Z Has data issue: false hasContentIssue false

Process and Equipment Issues in Rapid Thermal Oxidation (RTO)

Published online by Cambridge University Press:  28 February 2011

Sandeep Mehta Sandeep Mehta
Affiliation:
Varian Associates, Inc., Extrion Division, Dory Road, Gloucester, MA 01930
David Hodul David Hodul
Affiliation:
Varian Research Center, 611 Hansen Way, Palo Alto, CA 94303
Get access

Abstract

Thin oxides with thicknesses in the range of 150 to 300Å were grown on lOO-mm <100> Si wafers in a commercial RTP reactor. Growth temperatures and times were llO0-1200°C for 60-180 seconds in 100% 02 at 1 atmosphere. Oxide thickness uniformity was measured using ellipsometry; contour maps of thickness uniformity will be presented. The standard deviation wascalculated to be 2-2.5% within 5 mm of the edge using a method which weights the area represented by each of 45 data points per wafer. In order to correct for dynamic changes in temperature uniformity, a new annealing method was developed.Results on wafer-to-wafer uniformity will be presented. Improvements achieved by post-oxidation annealing in N2 and electrical uniformity of films will be discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable