Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T21:38:21.996Z Has data issue: false hasContentIssue false

Process Development and Integration of Piezoelectric Aluminum Nitride Thin-Film for RF MEMS Applications

Published online by Cambridge University Press:  11 February 2011

Rajnish K. Sharma
Affiliation:
Institute of Microelectronics, 11 Science Park Road, Singapore Science Park II, Singapore-117685, e-mail: sharma@ime.a-star.edu.sg; Fax: 65–6777–0670
Jiang Ning
Affiliation:
Institute of Microelectronics, 11 Science Park Road, Singapore Science Park II, Singapore-117685, e-mail: sharma@ime.a-star.edu.sg; Fax: 65–6777–0670
Feng Hanhua
Affiliation:
Institute of Microelectronics, 11 Science Park Road, Singapore Science Park II, Singapore-117685, e-mail: sharma@ime.a-star.edu.sg; Fax: 65–6777–0670
R. Gopalakrishnan
Affiliation:
Institute of Microelectronics, 11 Science Park Road, Singapore Science Park II, Singapore-117685, e-mail: sharma@ime.a-star.edu.sg; Fax: 65–6777–0670
Get access

Abstract

The aluminum nitride (AlN) process was successfully developed for as high frequency thin-film for bulk acoustic resonator applications. Columnar AlN was deposited on p-type (100) silicon substrate at 300–500°C using pulse direct current (DC) sputtering technique. Argon to nitrogen ratio was optimized to achieve stoichiometry at higher deposition rates of about 1000 Å/min at 1–4 kW DC power. The XRD of as-deposited and annealed AlN film shows preferred (002) orientations. The dry etching process was developed and etching rate about 3200 Å/min was achieved using Cl based chemistry. Film composition analysis was done using AES technique and stoichiometry was achieved.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable