Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T14:14:48.325Z Has data issue: false hasContentIssue false

Process Integration of A-Si:H Schottky Diode and thin Film Transistor for Low-Energy X-Ray Imaging Applications

Published online by Cambridge University Press:  10 February 2011

B. Park
Affiliation:
E&CE Department, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada. bpark@venus.uwaterloo.ca
R.V.R. Murthy
Affiliation:
E&CE Department, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
A. Sazonov
Affiliation:
E&CE Department, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
A. Nathan
Affiliation:
E&CE Department, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
S.G. Chamberlain
Affiliation:
DALSA Inc., 605 McMurray Road, Waterloo, Ontario N2V 2E9, Canada
Get access

Abstract

In this paper, we discuss the various design and fabrication issues related to the process integration of a molybdenum/amorphous silicon (Mo/a-Si:H) Schottky diode and a thin film transistor (TFT), for realization of an X-ray pixel intended for large area and low energy imaging applications. Here, the Schottky diode serves as the sensor and the TFT as a switching element for charge readout. Different pixel configurations are fabricated and compared taking into consideration design aspects such as leakage current, process sequence in terms of mask count, fill factor, and mechanical integrity of various layers. Preliminary X-ray response measurements, over the range (40 – 115) kVp, yield a pixel sensitivity of (1–10) million electrons for a readout sampling period of 16·7 ms.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable