Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T08:11:22.657Z Has data issue: false hasContentIssue false

Processing of Refractory Ores in a Microwave Induced “Cold” Plasma

Published online by Cambridge University Press:  25 February 2011

D.E. Bullard
Affiliation:
Both at Arizona Materials Laboratory, Department of Materials Science and Engineering, University of Arizona, Tucson, Arizona 85721
D.C. Lynch
Affiliation:
Both at Arizona Materials Laboratory, Department of Materials Science and Engineering, University of Arizona, Tucson, Arizona 85721
Get access

Abstract

A Microwave Induced Plasma has been used to investigate the processing of metallurgically significant refractory oxides in a non-equilibrium or “cold” plasma. The main emphasis of this work has centered on the reduction of TiO2 in a hydrogen plasma. The plasma was maintained using microwave energy (2.45 GHz) in a single mode resonant cavity. The reaction was monitored for volatile species with a quadrupole mass spectrometer, while the extent of reaction was determined by an external standard X-Ray diffraction technique. The effect of process variables (absorbed power by the plasma, chamber pressure, and time) on the extent of reaction was investigated. Hydrogen reduction in a plasma has produced up to 60% conversion of TiO2 to Ti2O3 in 11 minutes with the sample on a grounded support rod, while only an 8% conversion is observed for a sample on an insulated support rod. Sample temperatures were below 735 K for most plasma conditions, based upon thermodynamic considerations.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable