Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T16:42:17.356Z Has data issue: false hasContentIssue false

Processing of Silicon Oxides Thin Films by Thermal LPCVD Starting from Teos Mixtures

Published online by Cambridge University Press:  10 February 2011

Vassilis Em. Vamvakas
Affiliation:
Institute of Microelectronics, NCSR Demokritos, P.O. Box 60228, GR‐15310 Aghia Paraskevi, Greece, bambacas@cyclades.nrcps.ariadne‐t.gr
Dimitris Davazoglou
Affiliation:
Institute of Microelectronics, NCSR Demokritos, P.O. Box 60228, GR‐15310 Aghia Paraskevi, Greece, bambacas@cyclades.nrcps.ariadne‐t.gr
Constantin Vahlas
Affiliation:
Institute of Microelectronics, NCSR Demokritos, P.O. Box 60228, GR‐15310 Aghia Paraskevi, Greece, bambacas@cyclades.nrcps.ariadne‐t.gr
Get access

Abstract

A thermodynamic simulation is presented of the low pressure chemical vapor deposition (LPCVD) of silicon oxide thin films starting from TEOS and N2O mixtures within the temperature range 700 – 1300K, by minimizing the total Gibbs energy of the C‐H‐N‐O‐Si chemical system. It was found that at temperatures up to 1173K and N2O/TEOS molar ratios up to approximately 7, SiO2 films contain carbon impurities, while above this ratio deposits are carbon free. A corresponding experimental investigation is also presented where the obtained submicronic films are slightly substoichiometric in oxygen. They contain small carbon impurities the concentration of which decreases with the N2O/TEOS molar ratio.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable