Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T17:11:09.079Z Has data issue: false hasContentIssue false

Production of High Strength Pastes, Mortars, and Concretes

Published online by Cambridge University Press:  22 February 2011

Ramon L. Carrasquillo*
Affiliation:
Professor of Civil Engineering, Ferguson Structural Engineering Laboratory, The University of Texas, 10100 Burnet Road, BRC 24, Austin, Texas 78758
Get access

Abstract

For concrete, a grossly heterogeneous material, guidelines for selection of materials for its production, especially high strength concrete, should consider the interactions of its different components under load. Materials selection and production techniques for achieving concretes, mortars and cement pastes with strengths in excess of 10,000 psi are discussed. Emphasis is placed on the production of concretes having a compressive strength in the range of 10,000 to 15,000 psi using readily available materials and conventional production techniques. Emphasis is placed on the practical and technical significance of the factors involved in the selection of the materials and their proportions to achieve uniform, economical, high quality concrete. Selection of the concrete ingredients and their proportions is discussed in terms of their relative contribution to the compressive and flexural strength, elastic properties and observed failure mode of the paste, mortar and concrete. Production of concretes having compressive strengths in excess of 15,000 psi using exotic materials and special production techniques is also discussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable