Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T22:13:45.570Z Has data issue: false hasContentIssue false

Profiling of Anode Surface Cycled in LiBOB-based Electrolyte of Li Ion Batteries

Published online by Cambridge University Press:  01 February 2011

Unchul Lee
Affiliation:
Jow Sensor and Electronic Devices Directorate, U. S. Army Research Laboratory, Adelphi, MD 20783–1197
Kang Xu
Affiliation:
Jow Sensor and Electronic Devices Directorate, U. S. Army Research Laboratory, Adelphi, MD 20783–1197
Sheng S. Zhang
Affiliation:
Jow Sensor and Electronic Devices Directorate, U. S. Army Research Laboratory, Adelphi, MD 20783–1197
T. Richard
Affiliation:
Jow Sensor and Electronic Devices Directorate, U. S. Army Research Laboratory, Adelphi, MD 20783–1197
Get access

Abstract

As the youngest battery chemistry, Li ion technology was made possible by the formation of stable electrode/electrolyte interfaces. The correlation between the electrochemistry and the surface profile of the graphitic anode was studied in this work with a new salt lithium bis (oxalate) borate (LiBOB).

In an attempt to depict a dynamic picture of the formation of graphite/electrolyte interface during the initial forming cycle, we employed X-ray photoelectron spectroscopy in combination with the “pre-formation” technique to establish the dependence of the surface chemistry on the forming potential of the anode. A progressive transition in the 1s electron binding energies of the major elements was observed as the lithiation proceeds; however, the surface chemical species as well as their abundances seemed to stabilize around 0.55 V and remained constant during the subsequent delithiation process, indicating that a stable solid electrolyte interface (SEI) exists thereafter. Integrating the information revealed by different analyses, we believe that the reductive decomposition of BOB−-anion starts at ca. 1.00 V, while the effective protection of graphene surface by SEI is available after the anode is lithiated below the potential of 0.55 V.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable