Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T19:17:21.360Z Has data issue: false hasContentIssue false

Properties of Indium Tin Oxide Films Prepared Using Reactive RF Magnetron Sputtering

Published online by Cambridge University Press:  28 February 2011

Madhav Mehra
Affiliation:
Electronic Research Laboratories - Photographic Products Group Eastman Kodak Company, Rochester, NY 14650
Howard Rhodes
Affiliation:
Electronic Research Laboratories - Photographic Products Group Eastman Kodak Company, Rochester, NY 14650
Get access

Abstract

The results obtained upon reactively RF sputtering indium - tin oxide (ITO) films are presented. It is found that while the amount of oxygen in the chamber is very critical in determining the properties of the films, it is easy to deposit reproducible films even at low oxygen concentrations when using an oxide target. At concentrations of oxygen below 2 vol% the films deposited exhibit almost metallic conductivities, while retaining an average transparency in the visible range of over 85%. The resistivity of these films increases with the oxygen concentration in the chamber, but the transition is not as sharp as that observed upon sputtering a metal target. These films are found to have very good “figures of merit” and are promising in their use as transparent conductors.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable