Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T06:52:40.999Z Has data issue: false hasContentIssue false

Properties of Sputtered Bilayer WNx/W Diffusion Barriers between Si and Cu

Published online by Cambridge University Press:  17 March 2011

K. D. Leedy
Affiliation:
Air Force Research Laboratory, Sensors Directorate, Wright-Patterson AFB, OH 45433
M. J. O'Keefe
Affiliation:
University of Missouri-Rolla, Dept. of Metallurgical Engineering, Rolla, MO 65401
E. J. Dahlgren
Affiliation:
University of Missouri-Rolla, Dept. of Metallurgical Engineering, Rolla, MO 65401
J. T. Grant
Affiliation:
Research Institute, University of Dayton, Dayton, OH 45469
Get access

Abstract

Copper interconnect metallizations in next generation integrated circuits will require thin diffusion barrier layers (<20 nm) between the Cu and low-k dielectric which may also function as seed layers for subsequent material depositions. One possible structure entails a multicomponent diffusion barrier with a lower resistivity component, such as W on WNx. In this study, sputtered WNx/W bilayer thin films were investigated as diffusion barriers between Si and Cu. The total thickness of the WNx/W bilayer was fixed at 20 nm while the WNx thickness was varied from 0 to 20 nm. After deposition of the barrier films, a 100 nm thick Cu film was sputtered over the top of the á-W and amorphous WNx bilayer. The as-deposited WNx/W film stress was found to be strongly dependent on the relative amount of WNx and W present and the addition of a Cu overlayer was found to mitigate the stress levels. The WNx/W barriers remained stable after 650°C anneals and exhibited phase transformations to W2N. Microstructural characterization using transmission electron microscopy and x-ray diffraction and chemical analysis by x-ray photoelectron spectroscopy of the films were used to identify the as-deposited and transformed phases.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable