Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T18:33:47.472Z Has data issue: false hasContentIssue false

Ptfe Nanoemulsions as Spin-On, Low Dielectric Constant Materials For Ulsi Applications

Published online by Cambridge University Press:  15 February 2011

Tom Rosenmayer
Affiliation:
W.L. Gore & Associates, Inc., 1414 W. Hamilton Avenue, Eau Claire, WI 54701
Huey Wu
Affiliation:
W.L. Gore & Associates, Inc., 297 Blue Ball Road, Elkton, MD 21921
Get access

Abstract

ULSI Interconnects require insulative materials with as low a dielectric constant as possible in order to minimize crosstalk and parasitic capacitance. Transmission line simulations indicate that crosstalk in parallel interconnect lines can be dramatically reduced by lowering the dielectric constant of the insulation from 4 to 2. Polytetrafluoroethylene (PTFE) has a desirably low dielectric constant (2.05), but has previously been difficult to deposit in thin films suitable for integrated circuit applications. PTFE has other desirable properties, including temperature resistance in excess of 400 C and outstanding chemical resistance.

A novel liquid material has been developed which permits the spin coat deposition of full density PTFE films from 0.2 to 1.0 microns thick. The deposition liquid is a solvent-free, stable PTFE nanoemulsion consisting of fully cured < 0.05 micron particles, surfactant, and water. The nanoemulsion is an equilibrium phase which is thermodynamically stable, optically clear, and has low viscosity. These properties are achieved because of the unusually small particle size of the nanoemulsion. The films are uniform in thickness with a standard deviation of < 2% and edge-to-center variation of < 5%. The films have a weight loss rate of less than 0.008%/min at 425 ° C. Good adhesion to Al, Si3N4, Si, and SiO2 is obtained when the films are evaluated per ASTM D3359-93. Several reseachers have reported methods by which various materials may be deposited onto PTFE with acceptable results.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable