Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T14:19:08.023Z Has data issue: false hasContentIssue false

Pulsed Laser-Induced Melting of Intermediate Cu-Zn Phases

Published online by Cambridge University Press:  25 February 2011

David M. Follstaedt
Affiliation:
Sandia National Laboratories, P. O. Box 5800, Albuquerque, NM 87185
Paul S. Peercy
Affiliation:
Sandia National Laboratories, P. O. Box 5800, Albuquerque, NM 87185
John H. Perepezko
Affiliation:
Dept. Materials Science and Engineering, University of Wisconsin, Madison, WI 53706
Get access

Abstract

We have discovered that the β and γ brasses of Cu-Zn exhibit clearly resolved increases in reflectance upon melting with a 30 ns ruby laser, which allow their melt durations to be readily measured. This system thus offers potential for obtaining quantitative information about the solidification kinetics of metals. We have also found that a heteroepitaxial layer of β' brass is formed on the surface of (ordered) γ brass with 63 wt.% Zn following pulsed laser-induced melting. The β' layer is interpreted to mean that the metastable β phase (bcc) formed on the liquid-solid interface as the γ substrate attempted to regrow, and that β ordered to β' (B2) during cooling. The β formation implies that undercoolings > 16 K were attained during the attempted regrowth of the γ phase.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable