Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T21:12:41.136Z Has data issue: false hasContentIssue false

PVT Measurements and Critical Parameters of Water

Published online by Cambridge University Press:  21 February 2011

H. Hanafusa
Affiliation:
Department of Mechanical Engineering, Keio University, Yokohama 223, Japan
K. Kawai
Affiliation:
Department of Mechanical Engineering, Keio University, Yokohama 223, Japan
H. Sato
Affiliation:
Department of Mechanical Engineering, Keio University, Yokohama 223, Japan
M. Uematsu
Affiliation:
Department of Mechanical Engineering, Keio University, Yokohama 223, Japan
K. Watanabe
Affiliation:
Department of Mechanical Engineering, Keio University, Yokohama 223, Japan
Get access

Abstract

The PVT properties and vapor-pressures of water have been measured in the critical region by using a constantvolume apparatus immersed in the constant-temperature bath with the procedure of varying the sample mass along a prescribed isotherm. Ninety-one PVT and five vapor-pressure measurements along 11 isotherms cover the region of temperatures 643 to 673 K and of pressures 19.7 to 38.6 MPa, which corresponds to a density variation from 108 to 618 kg/m3. The experimental uncertainties of temperature, pressure and density are estimated 4 mK, 5 kPa and 0.04%, respectively. Based on these measurements, the critical parameters of water are proposed to be 647.061 K, 22.041 MPa and 322.4 kg/m3 by the scaling law analysis.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable