Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T20:29:06.787Z Has data issue: false hasContentIssue false

Quantitative Ruthenium Method for Analysis of Nitrogen Ion-Implanted Titanium Alloy (Ti-6AI-4V) and the Effect on Bacterial Adherence

Published online by Cambridge University Press:  15 February 2011

Beverly L. Giammara
Affiliation:
University of Louisville, Analytical Electron Microscopy Laboratory, Graduate Programs & Research, Louisville, KY 40292
James M. Williams
Affiliation:
Oak Ridge National Laboratory, Solid State Division, Oak Ridge, TN 37831
David J. Birch
Affiliation:
University of Louisville, Analytical Electron Microscopy Laboratory, Graduate Programs & Research, Louisville, KY 40292
Joanne J. Dobbins
Affiliation:
Bellarmine College, Department of Biology, Louisville, KY 40205
Get access

Abstract

The effects of nitrogen ion implantation of Ti-6AI-4V alloy on growth of Pseudomonas aeruginosa bacteria on surfaces of the alloy have been investigated. Results for ion implanted samples were compared with controls with similarly smoothly polished surfaces and with controls that had intentionally roughened surfaces. The test consisted of exposing sterile alloy samples to a microbiological broth, to which 24 hour-old cultures of Pseudomonas aeruginosa had been added. After bioassociation at normal temperature 37°C, bacteria adhering to the surface were fixed and treated with a new ruthenium tetroxide staining method, and quantified by use of scanning electron microscopy (SEM), back-scattered electron imaging and EDAX energy dispersive microanalysis. For smooth samples of the alloy, after a 12 hour growth period, the retained bacteria (revealed by the biologically incorporated ruthenium), decreased monotonically with nitrogen dose out to a total fluence of approximately 7 × 1017/cm2 in an affected depth of approximately 0.1500 μm. The SEM confirmed that the Pseudomonas aeruginosa adhered equally to control materials. The ruthenium studies revealed that the amount of bacterial adhesion is indirectly proportional to the nitrogen ion implantation of the titanium. The greater the percentage of nitrogen ion implantation in the titanium alloy, the less bacteria colonized the disk.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable