Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T04:04:25.993Z Has data issue: false hasContentIssue false

Radiation-Induced Grain Boundary Segregation in Austenitic Stainless Steels

Published online by Cambridge University Press:  16 February 2011

S. M. Bruemmer
Affiliation:
Pacific Northwest Laboratory, Richland, WA
L. A. Charlot
Affiliation:
Pacific Northwest Laboratory, Richland, WA
J. S. Vetrano
Affiliation:
Pacific Northwest Laboratory, Richland, WA
E. P. Simonen
Affiliation:
Pacific Northwest Laboratory, Richland, WA
Get access

Abstract

Radiation-induced segregation (RIS) to grain boundaries in Fe-Ni-Cr-Si stainless alloys has been measured as a function of irradiation temperature and dose. Heavyion irradiation was used to produce damage levels from 1 to 20 displacements per atom (dpa) at temperatures from 175 to 550°C. Measured Fe, Ni, and Cr segregation increased sharply with irradiation dose (from 0 to 5 dpa) and temperature (from 175 to about 350°C). However, grain boundary concentrations did not change significantly as dose or temperatures were further increased. Although interfacial compositions were similar, the width of radiation-induced enrichment or depletion profiles increased consistently with increasing dose or temperature. Impurity segregation (Si and P) was also measured, but only Si enrichment appeared to be radiation-induced. Grain boundary Si peaked at levels approaching 8 at% after irradiation doses to 10 dpa at an intermediate temperature of 325°C. No evidence of grain boundary silicide precipitation was detected after irradiation at any temperature. Equilibrium segregation of P was measured in the high-P alloys, but interfacial concentration did not increase with irradiation exposure. Comparisons to reported RIS in neutronirradiated stainless steels revealed similar grain boundary compositional changes for both major alloying and impurity elements.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable