Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T02:46:05.545Z Has data issue: false hasContentIssue false

Rapid Gel Cast Prototyping of Complex Paraelectric (Ba,Sr)TiO3/MgO Composites

Published online by Cambridge University Press:  01 February 2011

Jennifer Synowczynski
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Samuel Hirsch
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Bonnie Gersten
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Get access

Abstract

A rapid prototyping process for manufacturing complex three-dimensional RF structures in ceramic systems was developed. The process combines fundamentals from lost wax investment casting and ceramic gelcasting. The first step is to directly deposit a mold made of a low melting point wax using a high precision inkjet rapid prototyper. Then, a gelcasting slurry containing polymeric precursors, a high solids loading of ceramic powders and a free radical initiator is cast into the mold and polymerized to lock in the structure. Finally, the mold is melted and the remaining green part is sintered. Aqueous gelcasting slurries were developed for MgCO3, (Ba,Sr)TiO3, and a composite of (Ba,Sr)TiO3 and MgO. The maximum solids loading attained for each of the powders was 22 V%, 50 V%, and 25 V% respectively. The 50V% gelcast part had a more uniform microstructure, higher sintered density, less open porosity and smaller grain size than parts produced through dry pressing. The microstructural improvements resulted in a high dielectric permittivity.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable