Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T17:50:34.144Z Has data issue: false hasContentIssue false

Reactive Infiltration Processing of Bulk and Fiber-Reinforced NiAl

Published online by Cambridge University Press:  15 February 2011

T. A. Venkatesh
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
C. W. Sanmarchi
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
A. Mortensen
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
D. C. Dunand
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

Reactive infiltration processing was investigated in the NiAl system using nickel-powder and nickel-wire preforms. Inhomogeneous microstructures were often obtained with powder preforms which had high surface-to-volume ratio, low permeability and irregular infiltration paths. Homogenous NiAl could be obtained with nickel-wire preforms which had lower surface-to-volume ratio, higher permeability and regular infiltration paths. NiAl composites reinforced with short molybdenum fibers and long tungsten and sapphire fibers were also fabricated by reactive infiltration.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable