Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T08:01:34.163Z Has data issue: false hasContentIssue false

Reactive Ion Etching of WSi0.6 Gates for GaAs MESFETS

Published online by Cambridge University Press:  28 February 2011

C. L. Lin
Affiliation:
IBM Thomas J.Watson Research Center, P.O.Box 218, Yorktown Heights, New York, 10598
Peter D. Hoh
Affiliation:
IBM Thomas J.Watson Research Center, P.O.Box 218, Yorktown Heights, New York, 10598
Get access

Abstract

A process for reactive ion etching of 1μm and sub-micron WSi0.6 gates for GaAs MESFET integrated circuits has been developed.Using a CF4/O2 plasma, a 200am film of WSi0.6 could be etched in ≃ 5 minutes.This is sufficiently long for accurate process monitoring.A vertical edge profile has been obtained which is desirable for a self-aligned MESFET process.To achieve the vertical edge, careful control of the degree of over etch was necessary.This was accomplished by monitoring the intensity profile of a laser beam reflected from the wafer being etched.The widths of lines etched in WSi0.6 closely matched those of the resist pattern.Both 1μm and sub-micron FET's were fabricated.with excellent linewidth control and electrical characteristics

Information

Type
Articles
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable