Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T05:13:43.188Z Has data issue: false hasContentIssue false

Recent Advances in Repository Seal Materials

Published online by Cambridge University Press:  15 February 2011

D.M. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
F.L. Burns
Affiliation:
Formerly Office of Nuclear Waste Isolation, Battelle, Columbus, OH 43201, USA
Get access

Extract

One long-term solution proposed for isolating radioactive waste from the biosphere is containment in underground geologic repositories. A requirement for this procedure is that most penetrations into the repository region be sealed following emplacement of the waste. The general requirements of repository seal materials and the seal system are that these potential pathways to the biosphere be sealed adequately to prevent a) excess fluid flow into the repository and b) radionuclides in the waste from reaching the biosphere in quantities in excess of acceptable levels. For boreholes, shafts and tunnels it is generally recommended that in the post-closure phase, the permeability of sealed boreholes and shafts be approximately the same as the host rock or the aquitards in the zones where aquitards are intersected.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable