Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T21:41:32.589Z Has data issue: false hasContentIssue false

The Relationship Between Reaction Layer Thickness and Leach Rate For Nuclear Waste Glasses

Published online by Cambridge University Press:  25 February 2011

L. A. Chick
Affiliation:
Battelle Pacific Northwest Laboratory, P.O. Box 999, Richland, Washington 99352
L. R. Pederson
Affiliation:
Battelle Pacific Northwest Laboratory, P.O. Box 999, Richland, Washington 99352
Get access

Abstract

Three leaching tests, devised to distinguish among several proposed nuclear waste glass leaching mechanisms, were carried out for four different waste glasses. In the first test, the influence of a pre-formed reaction layer on elemental release was evaluated. In the second test, glass specimens were replaced with fresh samples halfway through the leaching experiment, to evaluate the influence of the concentration of glass components in leaching. Finally, regular replacement of the leachant at fixed time intervals essentially removed the variable of changing solution concentration, and allowed an assessment of the influence of reaction layer thickness on the leaching rate. Results for all glasses tested indicated that the reaction layer presented little or no barrier to leaching, and that most of the retardation on leaching rates generally observed are attributable to saturation effects.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable