Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T06:21:52.451Z Has data issue: false hasContentIssue false

Removing Grain Boundary Effects in Polycrystalline Silicon Using a Minority Carrier Mirror Concept

Published online by Cambridge University Press:  22 February 2011

F. Y. T. Kai
Affiliation:
Department of Electrical and Computer Engineering State University of New York at Buffalo, 4232 Ridge Lea Road Amherst, New York 14226
M. A. Jackson
Affiliation:
Department of Electrical and Computer Engineering State University of New York at Buffalo, 4232 Ridge Lea Road Amherst, New York 14226
M. Thayer
Affiliation:
Department of Electrical and Computer Engineering State University of New York at Buffalo, 4232 Ridge Lea Road Amherst, New York 14226
W. A. Anderson
Affiliation:
Department of Electrical and Computer Engineering State University of New York at Buffalo, 4232 Ridge Lea Road Amherst, New York 14226
Get access

Abstract

The boron minority carrier mirror (MCM) concept has been applied to Wacker poly-Si for passivation of active grain boundaries (GB). Photovoltaic, spectral response, laser beam induced current, electron beam induced current and interface state data show the MCM process to significantly improve solar cell performance. For example, an efficiency improvement from 6.4% to 8.8% was observed in part of the study. This appears to be a simple technique to produce stable solar cells with future application to fine grain poly-Si.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable