Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T10:33:05.239Z Has data issue: false hasContentIssue false

Replacement Zircaloy for Silicon Carbide as Fuel Cladding Material in PWR – A Neutronic Evaluation

Published online by Cambridge University Press:  13 February 2015

Rochkhudson B. de Faria*
Affiliation:
Departamento de Engenharia Nuclear – Escola de Engenharia Universidade Federal de Minas Gerais Avenida Antônio Carlos, 6627, Pampulha. 31270-901 – Belo Horizonte, Tel/Fax: 55-31-34096662, MG, Brazil.
Felipe Torres
Affiliation:
Departamento de Engenharia Nuclear – Escola de Engenharia Universidade Federal de Minas Gerais Avenida Antônio Carlos, 6627, Pampulha. 31270-901 – Belo Horizonte, Tel/Fax: 55-31-34096662, MG, Brazil.
Fabiana B. A. Monteiro
Affiliation:
Departamento de Engenharia Nuclear – Escola de Engenharia Universidade Federal de Minas Gerais Avenida Antônio Carlos, 6627, Pampulha. 31270-901 – Belo Horizonte, Tel/Fax: 55-31-34096662, MG, Brazil.Instituto Nacional de Ciências e Tecnologia de Reatores Nucleares Inovadores/CNPq, Brazil
Claubia Pereira
Affiliation:
Departamento de Engenharia Nuclear – Escola de Engenharia Universidade Federal de Minas Gerais Avenida Antônio Carlos, 6627, Pampulha. 31270-901 – Belo Horizonte, Tel/Fax: 55-31-34096662, MG, Brazil.Instituto Nacional de Ciências e Tecnologia de Reatores Nucleares Inovadores/CNPq, Brazil
Get access

Abstract

Silicon carbide (SiC) has a potential to replacement zircaloy as fuel cladding material due to its high temperature tolerance, chemical stability and low neutron affinity. These characteristics may improve the economic and safety of nuclear reactors. Previous work has examined the possible use of SiC as a fuel cladding material in a PWR (Pressurized Water Reactor) environment. However, the advantage thermo mechanical and neutronic analysis replacement zircaloy cladding is not clear. Literature reviews has been done to predict the thermo mechanical behavior of SiC in high temperatures. The neutronic analysis was made using the SCALE 6.0 (Standardized Computer Analysis for Licensing Evaluation) code. This codes system is widely accepted and used worldwide for safety analysis and criticality of nuclear reactors has been utilized to model a typical fuel element of a PWR. It was used the CSAS6 and TRITON modules. The goals are to evaluate the behavior of the infinite multiplication factor (kinf) and neutron flux using SiC as a fuel cladding material.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable