Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T04:40:40.409Z Has data issue: false hasContentIssue false

Roll-to-Roll Processes for the Manufacturing of Patterned Conductive Electrodes on Flexible Substrates

Published online by Cambridge University Press:  17 March 2011

Y.S. Chaug
Affiliation:
SiPix Imaging, Inc., 47485 Seabridge Dr., Fremont, CA 94538
Jeanne E. Haubrich
Affiliation:
SiPix Imaging, Inc., 47485 Seabridge Dr., Fremont, CA 94538
Mike Sereda
Affiliation:
SiPix Imaging, Inc., 47485 Seabridge Dr., Fremont, CA 94538
R.C. Liang
Affiliation:
SiPix Imaging, Inc., 47485 Seabridge Dr., Fremont, CA 94538
Get access

Abstract

Simple, cost-effective roll-to-roll processes for the manufacturing of patterned conductor films have been developed. The technique involves printing proprietary masking patterns, depositing conductive material, and stripping away undesired areas. In one approach, a pattern is printed on the plastic substrate with a masking coating. Then, conductive material is deposited on the patterned substrate and the undesired areas are stripped away, leaving behind the patterned electrode structures. In another approach, a first masking pattern is printed, followed by a second masking coating which is repelled by the first masking layer and forms the negative pattern. The first masking pattern is stripped off, a conductive layer is deposited, and the second masking pattern is stripped off, leaving a high resolution conductor pattern on the web. No photolithographic exposure, development or chemical etching is needed. These processes are useful for producing rolls of electrodes with features as small as 25 microns for the roll-to-roll manufacturing of flexible display applications.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable