Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T23:45:50.488Z Has data issue: false hasContentIssue false

A saw Sensor Study of the Relative Adhesion and Surface Properties of Polyimide Films

Published online by Cambridge University Press:  22 February 2011

D. W. Galipeau
Affiliation:
Laboratory for Surface Science and Technology and Department of Electrical Engineering, University of Maine, Orono. ME 04469
C. Feger
Affiliation:
IBM T. J. Watson Research Center, Room 39–114, P.O.Box 218, Yorktown Heights. NY 10598
J. F. Veteldmo
Affiliation:
Laboratory for Surface Science and Technology and Department of Electrical Engineering, University of Maine, Orono. ME 04469
Get access

Abstract

A surface acoustic wave (SAW) sensor is used to study the relative humidity response of polyimide films where interfacial and surface properties are varied. The relationship between these responses and the relative adhesion strength of these films is of particular interest since it could have application as a nondestructive, quantitative measure of adhesion strength. The results show clear differences in the SAW humidity response for cured and uncured films. There are also significant differences in the SAW humidity response for films applied with and without adhesion promoter. In addition the humidity response has proven to be particularly sensitive to the surface treatment of the polyimide film. These results suggest applications of the SAW sensor as a cure indicator, an in-situ sensor for the monitoring of film surface properties in process control applications and as an adhesion sensor.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable