Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T20:44:49.677Z Has data issue: false hasContentIssue false

Saxs Characterization of Pyrolytic Carbon Blacks

Published online by Cambridge University Press:  10 February 2011

B. Sahouli
Affiliation:
Physique des Matériaux, B 5, Université de Liège, 4000 Liège (Belgium)
S. Blacher
Affiliation:
Physique des Matériaux, B 5, Université de Liège, 4000 Liège (Belgium)
F. Brouers
Affiliation:
Physique des Matériaux, B 5, Université de Liège, 4000 Liège (Belgium)
R. Sobry
Affiliation:
Physique des Matériaux, B 5, Université de Liège, 4000 Liège (Belgium)
G. van den Bossche
Affiliation:
Physique des Matériaux, B 5, Université de Liège, 4000 Liège (Belgium)
H. Darmstadt
Affiliation:
Département de génie chimique, Université Laval Québec, Canada, GIK 7P4 (Canada)
C. Roy
Affiliation:
Département de génie chimique, Université Laval Québec, Canada, GIK 7P4 (Canada)
Get access

Abstract

The surface fractal dimension (Ds) of pyrolytic carbon blacks (CBp) was determined using small angle X-ray scattering (SAXS). The CBp were produced by vacuum pyrolysis of used tires at different temperatures and pressures. For the CBp a dependence of the pyrolysis conditions on the fractal dimension was observed. The fractal dimension decreases, suggesting a smother surface, with increasing pyrolysis pressure and to a lesser intent with increasing pyrolysis temperature. Earlier SIMS and ESCA investigations have indicated that an evident correlation exists between the surface morphology and the surface chemistry of the CBp. According to these investigations, the smoothing of the CBp surface is due to the formation of carbonaceous deposits from adsorbed hydrocarbons on the CBp.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable